NCERT Class 9 Skill Education MCQ Chapter 8 Additional Vocations

NCERT Class 9 Skill Education MCQ Chapter 8 Additional Vocations English Medium As Per New Syllabus. to each chapter is provided in the list so that you can easily browse through different chapters NCERT Class 9 Skill Education MCQ Chapter 8 Additional Vocations and select need one. NCERT Class 9 Skill Education MCQ Chapter 8 Additional Vocations Download PDF. NCERT Class 9 Skill Education Objective Type Solutions.

NCERT Class 9 Skill Education MCQ Chapter 8 Additional Vocations

Also, you can read the NCERT book online in these sections Solutions by Expert Teachers as per Central Board of Secondary Education (CBSE) Book guidelines. CBSE Class 9 Skill Education Multiple Choice Question English Medium are part of All Subject Solutions. Here we have given NCERT Class 9 Skill Education MCQs, CBSE Class 9 Skill Education Objective Type Notes for All Chapters, You can practice these here.

Additional Vocations

Chapter: 8

MCQ

1. What is the definition of “forming” in sheet metal work?

(a) Shaping metal by heating it to a liquid state.

(b) Shaping metal without cutting it.

(c) Cutting metal into small pieces.

(d) Joining two different metals together.

Ans: (b) Shaping metal without cutting it.

2. What is the main material used for fabrication in sheet metal work?

(a) Cardboard.

(b) PVC pipes.

(c) GI/Aluminium sheet.

(d) Seasoned wood.

Ans: (c) GI/Aluminium sheet.

3. Which tool is used for the manual cutting of sheet metal?

(a) Try square.

(b) Tin snips or shears.

(c) Plunger.

(d) Pipe wrench.

Ans: (b) Tin snips or shears.

4. In plumbing, what is the device used to control water flow called?

(a) Valve. 

(b) Rivet.

(c) Burr.

(d) Slip.

Ans: (a) Valve.

5. Which tool is specifically used for tightening and loosening pipe joints?

(a) Pipe wrench or spanner.

(b) Hacksaw.

(c) Wire cutter.

(d) Hand saw.

Ans: (a) Pipe wrench or spanner.

6. What material is used to prevent leakage at pipe joints?

(a) Slip.

(b) Sand or grog.

(c) Varnish. 

(d) Thread seal tape or adhesive.

Ans: (d) Thread seal tape or adhesive.

7. What is used for clearing blocked drains in plumbing?

(a) Hacksaw.

(b) Drill.

(c) Plunger.

(d) Mallet.

Ans: (c) Plunger.

8. What does food preservation mean?

(a) Methods used to increase the shelf life of food.

(b) Methods to cook food faster.

(c) Adding artificial colors to raw materials.

(d) Changing the uniform texture of food.

Ans: (a) Methods used to increase the shelf life of food.

9. Which of the following is considered a raw food material?

(a) Papad.

(b) Pickles.

(c) Roasted grains.

(d) Unprocessed food such as grains, fruits, vegetables, or milk.

Ans: (d) Unprocessed food such as grains, fruits, vegetables, or milk.

10. In furniture making, what does the term “joinery” refer to?

(a) The process of drying wood.

(b) Methods used to join two or more parts of furniture.

(c) Painting the final product.

(d) Cutting wood into equal halves.

Ans: (b) Methods used to join two or more parts of furniture.

11. What is “seasoned wood”?

(a) Wood that has been painted.

(b) Wood that has been soaked in water.

(c) Wood that has been dried to reduce moisture.

(d) Freshly cut bamboo.

Ans: (c) Wood that has been dried to reduce moisture.

12. Which tool is used to check right angles and alignment in furniture making?

(a) Tin snips.

(b) Bench vice.

(c) Plunger.

(d) Try square or spirit level.

Ans: (d) Try square or spirit level.

13. Why is clay “wedged” in pottery?

(a) To add color to the clay.

(b) To knead the clay to remove air bubbles and ensure even moisture.

(c) To heat the clay in a kiln.

(d) To cut the clay into smaller lumps.

Ans: (b) To knead the clay to remove air bubbles and ensure even moisture.

14. What does the process of “firing” in pottery involve?

(a) Kneading the clay.

(b) Drying the product in the shade.

(c) Heating clay in a kiln or open fire to make it hard and durable.

(d) Mixing clay with water to create slip.

Ans: (c) Heating clay in a kiln or open fire to make it hard and durable.

15. In pottery, what is “slip” used for?

(a) Cutting lumps of clay.

(b) Joining parts or surface decoration.

(c) Removing air bubbles from the clay.

(d) Measuring the dimensions of the pot.

Ans: (b) Joining parts or surface decoration.